Arizona Concrete Coatings Contractor Archives - Sledge Concrete Coatings
Call (602) 308-8656 Today for a 100% FREE Project Estimate!

The best method is to apply a small amount of the mix on the concrete surface and start spreading it evenly. If you want clean & professional looking edges, you need to use a concrete edger within 20 minutes of application. If you allow the mixture to cure untouched, the result will be a smooth surface. This is the best outcome for a garage floor but it can be slippery when wet which means it is undesirable for walkways or patios....

Read More

You should not mix more than one bag at a time. A professional tip is to use a 0.5 inch drill and paddle mixer to get the best results. As a rule of thumb, you will need around 3.5 quarts of water per 40 pound bag of mix. If you are resurfacing in warm weather, use cold water and if you are resurfacing in cold weather, use warm water. Make sure you have a large bucket; a 5 gallon plastic bucket is ideal. Pour most of the water in...

Read More

Once the concrete is deemed suitable for resurfacing, the next step is thorough cleaning of the surface. In most cases, a garden hose is sufficient but it may be better to use a pressure washer. If you decide to go down the more thorough route, use a 3,500 psi washer for best results. Remove any oil or paint stains from the concrete before moving on to the next step. Click here to learn more about our resurfacing...

Read More