by Sledge Concrete Coatings | Nov 23, 2014 | Blog, Concrete Coatings
photo credit: Christopher Simmonds Architect This is a common misconception since the shine makes the floor appear slippery. In reality, mechanically grinding the floor gets rid of high and low spots, which makes the surface less slippery than a VCT tile floor....
by Sledge Concrete Coatings | Nov 20, 2014 | Blog, Concrete Coatings
photo credit: emily jagoda We do not recommend using polished concrete with a high sheen outdoors, but low-sheen and matte are fine for exterior use. There are a host of other concrete applications that can be used outdoors as well, including saw cuts and exposed...
by Sledge Concrete Coatings | Nov 20, 2014 | Blog, Concrete Coatings
photo credit: houzz.com – Traditional Pool In a word, no. Cool deck is everything you need in a pool deck coating. It is easy to apply, as you can use normal paint equipment and it’s environmentally friendly. It can be used to repair damaged concrete and is...
by Sledge Concrete Coatings | Nov 20, 2014 | Blog, Concrete Coatings
photo credit: Western Aquatech Pools, Inc. If the surface is peeling or cracking, there are a number of potential solutions. A complete deck replacement is expensive and time-consuming, so it is better to concentrate on repairs. If you find large areas that are...
by Sledge Concrete Coatings | Nov 18, 2014 | Blog, Concrete Coatings
photo credit: Audrey Matlock Architects You can walk on a polished concrete floor during the grind and polish process, and since it is a mechanical process, there is no cure time. As a result, the floor is dry and ready for use in about 30 minutes if a sealer is used....
by Sledge Concrete Coatings | Nov 18, 2014 | Blog, Concrete Coatings
photo credit: Sage Design Studios, Inc. Applying a liquid coating over the original surface is a good solution if the damage is minimal. You need to sweep and clean the cool deck area before repairing it. You may need to acid wash the surface for best results. There...
Recent Comments